G-codes
G00   Positioning in Rapid
G01   Linear Interpolation
(G02   Circular Interpolation (CW
(G03   Circular Interpolation (CCW
G04   Dwell
G07   Imaginary axis designation
G09   Exact stop check
G10   Program parameter input
G11   Program parameter input cancel
G12   Circle Cutting CW
G13   Circle Cutting CCW
G17   XY Plane
G18   XZ Plane
G19   YZ Plane
G20   Inch Units
G21   Metric Units
G22   Stored stroke limit ON
G23   Stored stroke limit OFF
. .
. .
G27   Reference point return check
G28   Automatic return to reference point
G29   Automatic return from reference point
G30   Return to 2nd, 3rd, 4th reference point
G31   Skip function
. .
G33   Thread cutting
(G34   Bolt hole circle (Canned Cycle
(G35   Line at angle (Canned Cycle
(G36   Arc (Canned Cycle
G40   Cutter compensation Cancel
G41   Cutter compensation Left
G42   Cutter compensation Right
(G43   Tool Length Compensation (Plus
(G44   Tool Length Compensation (Minus
G45   Tool offset increase
G46   Tool offset decrease
G47   Tool offset double increase
G48   Tool offset double decrease
G49   Tool Length Compensation Cancel
G50   Scaling OFF
G51   Scaling ON
G52   Local coordinate system setting
G53   Machine coordinate system selection
G54   Workpiece Coordinate System
G55   Workpiece Coordinate System 2
G56   Workpiece Coordinate System 3
G57   Workpiece Coordinate System 4
G58   Workpiece Coordinate System 5
G59   Workpiece Coordinate System 6
G60   Single direction positioning
G61   Exact stop check mode
G62   Automatic corner override
G63   Tapping mode
G64   Cutting mode
G65   Custom macro simple call
G66   Custom macro modal call
G67   Custom macro modal call cancel
G68   Coordinate system rotation ON
G69   Coordinate system rotation OFF
G70   Inch Units
G71   Metric Units
G72   User canned cycle
G73   High-Speed Peck Drilling Cycle
G74   Counter tapping cycle
G75   User canned cycle
G76   Fine boring cycle
G77   User canned cycle
G78   User canned cycle
G79   User canned cycle
G80   Cancel Canned Cycles
G81   Drilling Cycle
G82   Counter Boring Cycle
G83   Deep Hole Drilling Cycle
G84   Tapping cycle
G85   Boring Cycle
G86   Boring Cycle
G87   Back Boring Cycle
G88   Boring Cycle
G89   Boring Cycle
G90   Absolute Positioning
G91   Incremental Positioning
G92   Reposition Origin Point
G93   Inverse time feed
G94   Per minute feed
G95   Per revolution feed
G96   Constant surface speed control
G97   Constant surface speed control cancel
G98   Set Initial Plane default
G99   Return to Retract (Rapid) Plane
. .
. .
. .
. .
. .

: M-codes
M00   Program Stop
M01   Optional Program Stop
M02   Program End
M03   Spindle On Clockwise
M04   Spindle On Counterclockwise
M05   Spindle Stop
M06   Tool Change
. .
M08   Coolant On
M09   Coolant Off
M10   Clamps On
M11   Clamps Off
M30   End of Program, Reset to Start
M98   Call subroutine command
M99   Return from subroutine command

Turning

: G-codes
G00   Positioning in Rapid
G01   Linear Interpolation
(G02   Circular Interpolation (CW
(G03   Circular Interpolation (CCW
G04   Dwell
G07   Feedrate sine curve control
. .
G10   Data setting
G11   Data setting cancel
. .
. .
G17   XY Plane
G18   XZ Plane
G19   YZ Plane
G20   Inch Units
G21   Metric Units
G22   Stored stroke check function ON
G23   Stored stroke check function OFF
G25   Spindle speed fluctuation detection OFF
G26   Spindle speed fluctuation detection ON
G27   Reference point return check
G28   Automatic Zero Return
G29   Return from Zero Return Position
G30   2nd reference point return
G31   Skip function
G32   Thread cutting
. .
G34   Variable lead thread cutting
. .
G36   Automatic tool compensation
G40   Tool Nose Radius Compensation Cancel
G41   Tool Nose Radius Compensation Left
G42   Tool Nose Radius Compensation Right
. .
. .
. .
G46   Automatic Tool Nose Radius Compensation
. .
. .
. .
G50   Coordinate system setting and maximum rpm
. .
G52   Local coordinate system setting
G53   Machine coordinate system setting
G54   Workpiece Coordinate System
G55   Workpiece Coordinate System 2
G56   Workpiece Coordinate System 3
G57   Workpiece Coordinate System 4
G58   Workpiece Coordinate System 5
G59   Workpiece Coordinate System 6
. .
G61   Exact stop check mode
G62   Automatic corner override
G63   Tapping mode
G64   Cutting mode
G65   User macro simple call
G66   User macro modal call
G67   User macro modal call cancel
G68   Mirror image for double turrets ON
G69   Mirror image for double turrets OFF
G70   Finishing Cycle
G71   Turning Cycle
G72   Facing Cycle
G73   Pattern repeating
G74   Peck Drilling Cycle
G75   Grooving Cycle
G76   Threading Cycle
. .
. .
. .
G80   Canned cycle for drilling cancel
. .
. .
G83   Face Drilling Cycle
G84   Face Tapping Cycle
. .
G86   Face Boring Cycle
G87   Side Drilling Cycle
G88   Side Tapping Cycle
G89   Side Boring Cycle
G90   Absolute Programming
G91   Incremental Programming
G92   Thread Cutting Cycle
. .
G94   Endface Turning Cycle
. .
G96   Constant surface speed control
G97   Constant surface speed control cancel
G98   Linear Feedrate Per Time
G99   Feedrate Per Revolution
G107 Cylindrical Interpolation
G112 Polar coordinate interpolation mode
G113 Polar coordinate interpolation mode cancel
G250 Polygonal turning mode cancel
G251 Polygonal turning mode

: M-codes
M00   Program Stop
M01   Optional Program Stop
M02   Program End
M03   Spindle On Clockwise
M04   Spindle On Counterclockwise
M05   Spindle Stop
. .
M07   Coolant 1 On
M08   Coolant 2 On
M09   Coolant Off
. .
. .
M30   End of Program, Reset to Start
M98   Subprogram call
M99   Return from subprogram